10th Jobs12th JobsBachelor’s Degree JobsCentral Govt JobsDegree JobsDiploma JobsGovt JobsHaryana Govt JobsHSSC RecruitmentM.E/M.Tech JobsMedical Jobs

HSSC Recruitment 2019 – Apply Online for 3206 Librarian, Welder, Instructor, Storekeeper Posts


Get All Upcoming Govt Jobs & Teaching Jobs alerts regularly through Telegram
telegram logo ⇉ Join Job alerts Telegram Group now ⇇

HSSC Recruitment 2019 – Haryana Staff Selection Commission recently released the recruitment advertisement for 3206 Librarian, Welder, Instructor, Storekeeper job in Haryana. The official notification for the post will be released on 05.08.2019 by HSSC on its official website. Interested and eligible candidates who are seeking to apply can fill HSSC Online Application from 05.08.2019 onwards. The last date for submitting Online applications is 20.08.2019. This is the good opportunity for the job hunters who are looking for the Career in HSSC. Before applying to this job, Aspirants are requested to go through the latest HSSC job notification 2019 fully. Haryana Staff Selection Commission (HSSC) job applications are collected by Online mode, through adv122019.hryssc.in.

Haryana Staff Selection Commission (HSSC) Librarian, Welder, Instructor, Storekeeper Recruitment 2019

The detailed information on HSSC latest job notification 2019 has been given below and this HSSC recruitment comes under the Government job. The job hunters are requested to read below the Haryana Staff Selection Commission (HSSC) Librarian, Welder, Instructor, Storekeeper job selection process, eligibility, salary, age limit and applications fee in our Jobskar.com website. Aspirants are also stay tuned in this page for upcoming changes in Haryana Staff Selection Commission job 2019 and also for getting all latest upcoming Government Jobs, Central Government Jobs, Faculty (Teaching) Jobs updates alerts (Join with us). However, for more accurate information on this Haryana Staff Selection Commission (HSSC) job notification check the official notification which is given below at the end of the article and also check their official website adv122019.hryssc.in.

HSSC Recruitment

Details of Haryana Staff Selection Commission (HSSC) Recruitment 2019

HSSC Recruitment 2019 All Latest and Upcoming Notifications released on HSSC Recruitment 2019 are updated right here. This is the best opportunity for the job seekers and aspirants who are looking for the Career in Haryana Staff Selection Commission (HSSC). The important details of HSSC Recruitment 2019 are highlighted in the table below.

HSSC Recruitment 2019 Details
Organization Name Haryana Staff Selection Commission (HSSC)
Job Type Government Job
Job Role Librarian, Welder, Instructor, Storekeeper
Total Vacancy 3206
Job Location Haryana
Salary (Pay Scale) Rs.35400 – Rs.112400 (varying by post)
Apply From 05.08.2019
Last Date 20.08.2019
Apply Mode Online
Official Website adv122019.hryssc.in

Haryana Staff Selection Commission (HSSC) Job Vacancy Details

Haryana Staff Selection Commission (HSSC) has released the following vacancy details with their recent recruitment. They invites the candidates to fill their 3206 Librarian, Welder, Instructor, Storekeeper job vacancies in Haryana. You can check their job vacancy details from below.

  • Total Number of Vacancies : 3206

HSSC Recruitment 2019 Post wise Vacancy details

Haryana Staff Selection Commission fill the below following posts to their recent HSSC recruitment 2019.

Name of the Post No. of Posts
Skill Development & Industrial Training Department, Haryana, Panchkula
Surveyor Instructor (Theory) 2
Forger & Heat Treater (Black Smith)Instructor (Theory) 1
Librarian (Re-Advertised) 45
Turner Instructor, Theory(Re-Advertised) 93
Welder (Gas & Electric) Instructor, Practical (ReAdvertised). 38
Fitter Instructor, Theory (Re-Advertised) 144
Employability Skill Instructor, (Re-Advertised). 114
Surveyor Instructor, Practical (Re-Advertised). 1
Computer Instructor (Re-Advertised 59
Mechanical Refrigerator and Air Condition Instructor, Theory (Re-Advertised) 68
Workshop Calculation & Science Instructor (ReAdvertised) 244
Engineering Drawing Instructor (Re-Advertised). 277
Plumber Instructor, Theory (Re-Advertised). 58
Foundry Man (Moulder) Instructor (Theory) (Re-Advertised). 2
Architectural Assistant Instructor, Theory (Re-Advertised) 3
Carpenter Instructor, Practical (Re-Advertised) 14
Wireman Instructor, Theory (Re-Advertised) 47
Storekeeper (Re-Advertised) 112
Mill wright Mechanic (Electrical/Electronic) Instructor, Theory (Re-Advertised) 18
Machinist Instructor, Practical (Re-Advertised 8
Mill wright Mechanic (Mechanical) Instructor, Theory (ReAdvertised). 43
Group Instructor/ Apprenticeship Supervisor/Senior Technical Assistant/ Junior apprenticeship and Placement Officer (Re-Advertised). 132
Electrician Instructor Theory(Re-Advertised). 143
Apprenticeship Instructor Re-Advertised). 38
Turner Instructor Practical(Re-Advertised) 51
Welder (Gas & Electric) Instructor Theory (ReAdvertised). 123
Architectural Assistant Instructor Practical (ReAdvertised) 6
Mechanic Electronic Instructor Theory(Re-Advertised). 44
Fitter Instructor Practical(Re-Advertised). 89
Computer Operator Programming Assistant Instructor (Theory) (Re-Advertised). 31
Plastic Processing Operator Instructor (Practical) (ReAdvertised). 2
Mechanic Electronic Instructor (Practical) (ReAdvertised). 37
Desk Top Publisher Operator Instructor (Practical) (ReAdvertised). 1
Plastic Processing Operator Instructor Theory) (ReAdvertised) 6
Electrician Instructor (Practical) (Re-Advertised) 108
Tractor Mechanic Instructor (Theory) (Re-Advertised) 42
Craft Instructor (women) Fashion Technology (Theory) (ReAdvertised). 3
Tractor Mechanic Instructor (Practical) (Re-Advertised) 5
Wireman Instructor (Practical) (Re-Advertised). 40
Mechanic Computer Hardware Instructor (Theory) (ReAdvertised). 7
Mechanic Computer Hardware Instructor (Practical) (ReAdvertised). 12
Mech. Refrigerator and Air Conditioning Instructor (Practical) (Re-Advertised). 42
Desktop Publisher Operator (Theory) (Re-Advertised) 2
Draughtsman Civil Instructor (Practical) (Re-Advertised) 45
Draughtsman Mechanical Instructor(Theory) (ReAdvertised). 38
Craft Instructor (women) cutting & Sewing (Theory) (ReAdvertised) 41
Draughtsman Mechanical Instructor (Practical) (ReAdvertised). 28
Craft Stenography Hindi Instructor (Theory) (ReAdvertised). 30
Craft Stenography Hindi Instructor (Practical) (ReAdvertised). 12
Machinist Instructor (Theory) (Re-Advertised) 73
Craft Stenography English Instructor (Theory) (ReAdvertised). 31
Craft Stenography English Instructor (Practical) (ReAdvertised) 21
Machinist (Grinder) Instructor (Practical) (Re-Advertised) 2
Craft Instructor Health Sanitary Inspector (Theory) (ReAdvertised). 6
Craft Instructor Health Sanitary Inspector (Practical) (ReAdvertised) 6
Machinist Grinder Instructor (Theory) (Re-Advertised). 7
Litho Offset Machine Minder Instructor (Theory) (ReAdvertised)= 3
Tool & Die Maker (Dies & Moulds) Instructor (Theory) (Re-Advertised) 11
Hospitality Course Senior Instructor (Hospitality) (Theory) (Re-Advertised). 3
Tool & Die Maker (Dies & Moulds) Instructor (Practical) (Re-Advertised) 5
Food production Instructor (Theory) (Re-Advertised). 4
Computer Networking and Hardware Technician (ReAdvertised). 1
Craft Instructor (women) Hair & Skin Care (Practical) (Re-Advertised). 63
Computer Operator (Re-Advertised). 5
Junior Programmer (Re-Advertised). 2
Craft Instructor (women)Fashion Technology (Practical) (Re-Advertised). 4
Plumber Instructor (Practical) (Re-Advertised). 28
Mill Wright Mechanic (Electrical/ Electronics) Instructor (Practical) (Re- Advertised). 19
Mill Wright Mechanic (Mechanical) Instructor (Practical) (Re- Advertised). 44
Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Fashion Technology, Cutting and Sewing, Embroidery and Needle Work, Dress making (Re- Advertised) 10
Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Hair & Skin Care (Re- Advertised). 3
Lab Attendant (Food Production, Food & Beverage Service) Instructor (Theory) (Re- Advertised). 4
Painter General Instructor(Theory) (Re- Advertised) 38
Mechanic Motor Vehicle Instructor(Theory) (ReAdvertised). 56
Information Technology and Electronics System Maintenance Instructor(Theory) (Re- Advertised). 1
Mechanic Machine Tool maintenance Instructor(Theory) (Re- Advertised) 1
Mechanic Motor Vehicle Instructor(Practical) (ReAdvertised). 25
Information Technology and Electronics System Maintenance Instructor (Practical) (Re- Advertised 3
Mechanic Machine Tool Maintenance Instructor (Practical) (Re- Advertised). 2
Sheet Metal Worker Instructor (Theory) (Re- Advertised) 7
Instrument Mechanic Instructor (Theory) (Re- Advertised). 8
Craft Instructor (women)(Dress Making (Theory) (ReAdvertised). 19
Mechanic Diesel Instructor(Theory) (Re- Advertised). 39
Instrument Mechanic Instructor (Practical) (ReAdvertised). 4
Craft Instructor (women)(Dress Making) (Practical) (Re- Advertised) 14
Mechanic Diesel Instructor (Practical) (Re- Advertised) 19
Mechanic Agriculture Machinery Instructor (Theory) (ReAdvertised). 5
Mechanic Consumer Electronics Instructor (Practical) (Re- Advertised). 12
Mechanic Agriculture Machinery Instructor (Practical) (ReAdvertised) 3
Craft Instructor (women) Hair & Skin Care(Theory) (ReAdvertised) 30
Interior Decoration and Designing Instructor (Theory) (ReAdvertised). 2
Interior Decoration and Designing Instructor (Practical) (Re- Advertised) 1
Craft Instructor (women) Computer Aided Embroidery (Theory) (Re- Advertised) 6
Craft Instructor (women) Computer Aided Embroidery (Practical) (Re- Advertised) 6
Draughtsman Civil Instructor (Theory) (Re- Advertised) 58
Carpenter Instructor (Theory) (Re- Advertised) 61
Technical Assistant(Re- Advertised). 2

(Reservations for various Categories i.e. for OBC / SC / ST / PwD etc is applicable as per Government Rules)

HSSC 3206 Librarian, Welder, Instructor, Storekeeper Eligibility Details

As per the recent Haryana Staff Selection Commission (HSSC) job notification, the eligibility details for the Librarian, Welder, Instructor, Storekeeper job are given below. Its is very important to check your eligibility criteria for this HSSC job opportunity. If your eligibility criteria does not meets, you may not able to apply for this career. Here below you can find the age limit as well as educational qualification required for Haryana Staff Selection Commission (HSSC) job 2019.

HSSC Librarian, Welder, Instructor, Storekeeper Educational Qualification

Candidates can check their education qualification required for Haryana Staff Selection Commission (HSSC) Librarian, Welder, Instructor, Storekeeper job opportunities.

Name of the Post Qualification
Skill Development & Industrial Training Department, Haryana, Panchkula 
Surveyor Instructor (Theory) i) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture/Civil/Survey from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience.
OR
Diploma in Engineering or its equivalent in Architecture/Architectural Assistant/Civil/Syrvey from State Board of Technical Education of any State Government with two years practical/ teaching experience.
(ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Forger & Heat Treater (Black Smith)Instructor (Theory) (i) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Metallurgical/Mechanical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience.
OR
Diploma in Engineering or its equivalent in Metallurgical/Mechanical from State Board of Technical Education of any State Government with two years practical/ teaching experience.
(ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Librarian (Re-Advertised) (i) Bachelor degree in Library Science from a recognized university; (ii)Two years experience as a Junior Librarian in any reputed Institute;
(iii)Hindi / Sanskrit upto Matric Standard or higher education.
Turner Instructor, Theory(Re-Advertised) (i) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical / Production/ Industrial Engineering from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience.
OR
Diploma in Engineering or its equivalent in Mechanical/ Production/Industrial from State Board of Technical Education of any State Government with two years practical/ teaching experience.
(ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Welder (Gas & Electric) Instructor, Practical (ReAdvertised). (i) National Trade Certificate/ National Apprenticeship Certificate in Welding/Fabrication (CoE) with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Welding passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. (ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Fitter Instructor, Theory (Re-Advertised) (i) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/ Production/ Industrial/ Fabrication Engineering from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience.
OR
Diploma in Engineering or its equivalent in Mechanical/ Production/ Industrial/ Fabrication from State Board of Technical Education of any State Government with two years practical/ teaching experience.
(ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Employability Skill Instructor, (Re-Advertised). i)Full time, regular mode Bachelor degree of Business Administration (BBA) and Master of Business Administration (MBA) from recognized university
ii) Hindi / Sanskrit upto Matric standard or higher education;
Surveyor Instructor, Practical (Re-Advertised). (i) National Trade Certificate/ National Apprenticeship Certificate in Surveyor with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Surveyor passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Computer Instructor (Re-Advertised i) AICTE recognized Bachelor degree in Computer Engineering/ Information Technology or its equivalent from AICTE recognized institute/university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/teaching experience; OR ‘A’ level certificate from Department of Electronics and Information Technology (DOEACC), Government of India, with two years practical/ teaching experience in the related field;
OR
B’ level certificate from Department of Electronics and Information Technology (DOEACC), Government of India, with one year practical/teaching experience in the related field;
OR
M.Sc Computer/ M.Sc Computer Application/ M.Sc Information Technology/ M.Sc Software/MCA after passing B.Sc./ BCA from a recognized university;
Mechanical Refrigerator and Air Condition Instructor, Theory (Re-Advertised) (i) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Electrical/Refrigeration and Air Conditioning from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR
Diploma in Engineering or its equivalent in Mechanical/Electrical/ Refrigeration and Air Conditioning from State Board of Technical Education of any State Government with two years practical/ teaching experience. ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Workshop Calculation & Science Instructor (ReAdvertised) (i)AICTE recognized Bachelor degree in Engineering/ Technology or its equivalent in Electrical/ Mechanical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience;
OR
Diploma in Engineering or its equivalent in Electrical /Mechanical from State Board of Technical Education of any State Government with two years practical/teaching experience.
(ii) Knowledge of Hindi / Sanskrit upto Matric standard or higher education.
Engineering Drawing Instructor (Re-Advertised). AICTE recognized Bachelor degree in Engineering/ Technology or its equivalent in Electrical/ Mechanical trade, from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience; OR Diploma in Engineering or its equivalent in Electrical /Mechanical trade, from State Board of Technical Education of any State Government with two years practical/teaching experience.
Plumber Instructor, Theory (Re-Advertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture/ Civil from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture/ Civil from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Foundry Man (Moulder) Instructor (Theory) (Re-Advertised).  AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Metallurgical/Mechanical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Metallurgical/Mechanical from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Architectural Assistant Instructor, Theory (Re-Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Carpenter Instructor, Practical (Re-Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture/Civil from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture/Civil from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Wireman Instructor, Theory (Re-Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Electrical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Electrical from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Storekeeper (Re-Advertised) (i) Full time, regular mode bachelor degree in Business Administration or Commerce or bachelor degree in Arts with Math/ Economics subject, passed with minimum 55% marks from any recognized University;
(ii) One years experience in handling Engineering Store, Posting of Stock Books and Ledgers or in accounts work in Govt. or Private reputed Engineering Institute or any Firm/company registered under Apprenticeship Act; iii) Hindi / Sanskrit upto Matric standard or Higher Education
Mill wright Mechanic (Electrical/Electronic) Instructor, Theory (Re-Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Electrical/ Mechatronics/ Electronics from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience.
OR
Diploma in Engineering or its equivalent in Electrical/ Mechatronics / Electronics from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Machinist Instructor, Practical (Re-Advertised (i) National Trade Certificate/ National Apprenticeship Certificate in Machinist with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade isnot available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Machinist passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Mill wright Mechanic (Mechanical) Instructor, Theory (ReAdvertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Mechatronics/Instrumentation from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience.
OR
Diploma in Engineering or its equivalent in Mechanical/Mechatronics/Instrumentation from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Group Instructor/ Apprenticeship Supervisor/Senior Technical Assistant/ Junior apprenticeship and Placement Officer (Re-Advertised). (i)AICTE recognized Bachelor degree in Civil/Mechanical / Production/ Architecture/Computer/Electrical/Electronics/Instrumentation /Automobile /Industrial Engineering/Technology or its equivalent from AICTE recognized institute/university or institutions established by Ministry of Human Resource Development (MHRD) , Government of India , on Full time regular mode basis ;
(ii) Two year practical/teaching experience in the concerned trade in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution ;
(iii) Hindi/Sanskrit upto Matric Standard or Higher Education
Electrician Instructor Theory(Re-Advertised).  AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Electrical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Electrical from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Apprenticeship Instructor Re-Advertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Electrical/Electronics /Production / Automobiles from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Electrical/Electronics /Production / Automobiles from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Turner Instructor Practical(Re-Advertised) (i) National Trade Certificate/ National Apprenticeship Certificate in Turner with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Turner passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
(ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Welder (Gas & Electric) Instructor Theory (ReAdvertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/ Metallurgical /Production/Fabrication/ Welding from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Metallurgical/ Production/ Fabrication/ Welding from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Architectural Assistant Instructor Practical (ReAdvertised) National Trade Certificate/ National Apprenticeship Certificate in Architectural Assistant with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Architectural Assistant passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Mechanic Electronic Instructor Theory(Re-Advertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Electronics/Electronics & Communications from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Electronics/Electronics & Communications from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Fitter Instructor Practical(Re-Advertised). National Trade Certificate/ National Apprenticeship Certificate in Fitter with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Fitter passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period
Computer Operator Programming Assistant Instructor (Theory) (Re-Advertised). AICTE recognized Bachelor degree in Computer Engineering/ Information Technology or its equivalent from AICTE recognized institute/university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/teaching experience; OR ‘A’ level certificate from Department of Electronics and Information Technology (DOEACC), Government of India, with two years practical/ teaching experience in the related field; OR B’ level certificate from Department of Electronics and Information Technology (DOEACC), Government of India, with one year practical/teaching experience in the related field; OR M.Sc Computer/ M.Sc Computer Application/ M.Sc Information Technology/ M.Sc Software/MCA after passing B.Sc./ BCA from a recognized university; OR Three years Diploma in Computer Application/ Engineering or its equivalent from State Board of Technical Education of any State Government with two years practical/ teaching experience;
Plastic Processing Operator Instructor (Practical) (ReAdvertised). National Trade Certificate/ National Apprenticeship Certificate in Plastic Processing Operator with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/National Apprenticeship Certificate in Plastic Processing Operator passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period
Mechanic Electronic Instructor (Practical) (ReAdvertised). National Trade Certificate/ National Apprenticeship Certificate in Electronics with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Desk Top Publisher Operator Instructor (Practical) (ReAdvertised). (i) National Trade Certificate/ National Apprenticeship Certificate in Desktop publisher operator with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Desktop publisher operator passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Plastic Processing Operator Instructor Theory) (ReAdvertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Plastic Processing/ Plastic Technology / Polymer/Plastic Mould from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Plastic Processing/ Plastic Technology / Polymer/Plastic Mould from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Electrician Instructor (Practical) (Re-Advertised) National Trade Certificate/ National Apprenticeship Certificate in Electrician with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Electrician passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Tractor Mechanic Instructor (Theory) (Re-Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Automobile/ Agriculture from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Automobile/ Agriculture from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Craft Instructor (women) Fashion Technology (Theory) (ReAdvertised). Full time, regular mode Bachelor Degree in Apparel/Dress Design/ Garment Manufacturing/Fashion Technology from any institute/ University recognized by National Institute of Fashion Technology (NIFT)/ All India Council of Technical Education/ State Board of Technical Education of any State Government with one year practical/ teaching experience. OR Full time, regular mode Diploma in Apparel/Dress Design/ Garment Manufacturing/Fashion Technology from State Board of Technical Education of any State Government or National Institute of Fashion Technology with two year practical/ teaching experience
Tractor Mechanic Instructor (Practical) (Re-Advertised) National Trade Certificate/ National Apprenticeship Certificate in Tractor Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Tractor Mechanic/ Farm Mechanic and Agriculture Mechanic Machinery passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Wireman Instructor (Practical) (Re-Advertised). National Trade certificate/ National Apprenticeship Certificate in Wireman with crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Wireman passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Mechanic Computer Hardware Instructor (Theory) (ReAdvertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Computer/Electronics from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Computer/Electronics/, Computer Hardware from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Mechanic Computer Hardware Instructor (Practical) (ReAdvertised). National Trade Certificate/ National Apprenticeship Certificate in Mechanic Computer Hardware with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/teaching experience including training period. In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Mechanic Computer Hardware/Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Mech. Refrigerator and Air Conditioning Instructor (Practical) (Re-Advertised). National Trade Certificate/ National Apprenticeship Certificate in Mechanic Refrigeration & Air Conditioning with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Refrigeration & Air Conditioning passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Desktop Publisher Operator (Theory) (Re-Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Printing Technology from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Printing Technology from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Draughtsman Civil Instructor (Practical) (Re-Advertised) National Trade Certificate/ National Apprenticeship Certificate in Draughtsman Civil with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Draughtsman Civil passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Draughtsman Mechanical Instructor(Theory) (ReAdvertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical from State Board of Technical Education of any State Government with two years practical/ teaching experience
Craft Instructor (women) cutting & Sewing (Theory) (ReAdvertised) Full time, regular mode Bachelor Degree in Apparel/ Dress Design/ Garment Manufacturing from any institute/ University recognized by National Institute of Fashion Technology (NIFT)/ All India Council of Technical Education/ State Board of Technical Education of any State Government with one year practical/teaching experience;
OR
Full time regular mode Diploma in Apparel/ Dress Design/ Garment Manufacturing from State Board of Technical Education of any State Government or National Institute of Fashion Technology with two year practical/ teaching experience;
Draughtsman Mechanical Instructor (Practical) (ReAdvertised). National Trade Certificate/ National Apprenticeship Certificate in Draughtsman(Mechanical) with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Draughtsman (Mechanical) passed with 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period
Craft Stenography Hindi Instructor (Theory) (ReAdvertised). (i) Full time regular mode bachelor degree with minimum 60% marks in Hindi subject, from a recognized University;
(ii) Diploma in Office Management and Computer Application (Hindi) or its equivalent from State Board of Technical Education of any State Government.
(iii) Shorthand at a speed of 80 words per minute and 15 words per minute Transcriptions thereof and 30 word per minute in typing in Hindi; (iv) ‘O’ level certificate in Computer from Department of Electronics and Information Technology (DOEACC), Government of India or its equivalent course from State Board of Technical Education of any State Government/recognized university;
Craft Stenography Hindi Instructor (Practical) (ReAdvertised). (i) Full time regular mode bachelor degree with minimum 60% marks in Hindi subject, from a recognized University; (ii) National Trade Certificate/National Apprenticeship Certificate in shorthand Hindi trade passed with minimum 70% marks and CITC in Steno Hindi; (iii) Shorthand at a speed of 80 words per minute and 15 words per minute Transcriptions thereof and 30 word per minute in typing in Hindi; (iv) ‘O’ level certificate in Computer from Department of Electronics and Information Technology (DOEACC), Government of India or its equivalent course from State Board of Technical Education of any State Government/recognized university;
Machinist Instructor (Theory) (Re-Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Production/ Industrial/Fabrication from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/Production/Industrial/ Fabrication from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Craft Stenography English Instructor (Theory) (ReAdvertised). (i) Bachelor degree with minimum 60% marks in English subject, from a recognized University;
(ii) Diploma in Office Management and Computer Application (English) or its equivalent from State Board of Technical Education of any State Government.
\(iii) Shorthand at a speed of 100 words per minute and 15 words per minute transcription thereof and 40 words per minute typing in English;
Craft Stenography English Instructor (Practical) (ReAdvertised) (i) Bachelor degree with minimum 60% marks in English subject, from a recognized University;
(ii) National Trade Certificate/National Apprenticeship Certificate with minimum 70% marks with CITC in Steno (English);
\(iii) Shorthand at a speed of 100 words per minute and 15 words per minute transcription thereof and 40 words per minute typing in English; (iv) ‘O’ level certificate in Computer from Department of Electronics and Information Technology (DOEACC), Government of India or its equivalent from State Board of Technical Education of any State Government/recognized university;
Machinist (Grinder) Instructor (Practical) (Re-Advertised) i) National Trade Certificate/ National Apprenticeship Certificate in Machinist (Grinder) with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Machinist (Grinder) passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Craft Instructor Health Sanitary Inspector (Theory) (ReAdvertised). Bachelor degree in Ayurvedic Medicine & Surgery (BAMS) from a recognized institution/university; OR AICTE Recognized Bachelor degree in Public Health and Environmental or Environmental Engineering/ Technology or its equivalent from AICTE recognized institute/university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis; OR Post Diploma in Health care with B.Sc. Degree; OR Diploma in Public Health and Environmental or Environmental Engineering from State Board of Technical Education of any State Government;
Craft Instructor Health Sanitary Inspector (Practical) (ReAdvertised) (i) National Trade Certificate/ National Apprenticeship Certificate in Health Sanitary Inspector;
(ii) Five years practical/teaching experience in concerned trade from recognized Institution/ Industrial concern covered under Apprenticeship Act, including training period;
(iii) Hindi/ Sanskrit upto Matric Standard or higher education;
Machinist Grinder Instructor (Theory) (Re-Advertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/ Production/ Industrial/ Fabrication from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Production/ Industrial/ Fabrication from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Litho Offset Machine Minder Instructor (Theory) (ReAdvertised)= AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Printing Technology from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Printing Technology from State Board of Technical Education of any State Governmentwith two years practical/ teaching experience.
Tool & Die Maker (Dies & Moulds) Instructor (Theory) (Re-Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Production/Industrial/Mechanical (Tool & Dies Maker)from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/Production/Industrial/Mechanical (Tool & Dies Maker) from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Hospitality Course Senior Instructor (Hospitality) (Theory) (Re-Advertised). Bachelor degree in Hotel Management passed with minimum 55% marks form an institute/university approved by National Council of Hotel management & Catering Technology or All India Council of Technical Education. OR Three year Diploma in Hotel Management passed with minimum 55% marks from an institute/university approved by National Council of Hotel management & Catering Technology or All India Council of Technical Education or State Board of Technical Education of any State Government;
Tool & Die Maker (Dies & Moulds) Instructor (Practical) (Re-Advertised) National Trade certificate/ National Apprenticeship Certificate in Tool and Dies Maker (Dies and Moulds) with crafts instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Tool and Dies Maker passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Food production Instructor (Theory) (Re-Advertised). Bachelor degree in Hotel Management passed with minimum 50% marks form an institute/university approved by National Council of Hotel Management & Catering Technology or All India Council of Technical Education. OR Three year Diploma in Hotel Management passed with minimum 55% marks from an institute/university approved by National Council of Hotel Management & Catering Technology or All India Council of Technical Education or State Board of Technical Education of any State Government;
Computer Networking and Hardware Technician (ReAdvertised). (i) 10+2 with Physics & Chemistry from a recognized Institute;
(ii) Three years diploma in Computers/ Electronics Communication or its equivalent from State Board of Technical Education of any State Government with two years relevant experience in a company of repute covered under Apprenticeship Act;
(iii) Hindi/ Sanskrit upto Matric Standard or higher education.
Craft Instructor (women) Hair & Skin Care (Practical) (Re-Advertised). i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teaching Training Course (TTC) in Hair & Skin Care with five year practical/ teaching experience including training period; ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Computer Operator (Re-Advertised). (i) 10+2 or its equivalent from a recognized Institution;
ii) Diploma in Computer Application/ Computer Science/ Computer Engineering or its equivalent from State Board of Technical Education of any State Government. OR Post Diploma in Computer Application/ Computer Engineering or its equivalent from State Board of Technical Education of any State Government. OR ‘O level’ course from Department of Electronics and Information Technology (DOEACC), Government of India;
Junior Programmer (Re-Advertised). i) Full time Regular mode Bachelor degree in Computer Applications or Regular first division Master degree in Computer Application with first division from a recognized University and two years experience in Software Development in a Government Department/ Statutory Board/ Public Sector undertaking/ Public Limited Company of repute; OR Full time Regular mode Diploma in Computer Science & Engineering / Computer Engineering/ Information Technology with first division from a Institute affiliated with State Board of Technical Education of any State Government and two years experience in software development in a Government department/Statutory Board/ Public Sector Undertaking/ Public Limited Company of repute
Craft Instructor (women)Fashion Technology (Practical) (Re-Advertised). National Trade Certificate /National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training Course (TTC) in Fashion Technology with five year Practical/teaching experience including training period;
Plumber Instructor (Practical) (Re-Advertised). (i) National Trade Certificate/ National Apprenticeship Certificate in Plumber with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Plumber passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Mill Wright Mechanic (Electrical/ Electronics) Instructor (Practical) (Re- Advertised). National Trade Certificate/ National Apprenticeship Certificate in Electrician/Electronics/Instrument Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Electrician/ Electronics/Instrument Mechanic passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Mill Wright Mechanic (Mechanical) Instructor (Practical) (Re- Advertised). i) National Trade Certificate/ National Apprenticeship Certificate in Millwright Mechanic/Mechanic Machine Tool Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Millwright Mechanic/Mechanic Machine Tool Maintenance passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Fashion Technology, Cutting and Sewing, Embroidery and Needle Work, Dress making (Re- Advertised) Full time, Regular mode Bachelor degree in Apparel/Dress Design/Garment Manufacturing/Fashion Technology / Fashion Designing from any institute recognized by National institute of Fashion Technology / State Board of Technical Education of any State Government/All India Council of Technical Education with two years Supervisory/practical/teaching experience in the concerned trade from a reputed Industry/recognized institution; OR Full time, Regular mode Diploma in Apparel/Dress Design/Fashion Designing/Garment Manufacturing/Fashion Technology from any institute recognized by National institute of Fashion Technology / State Board of Technical Education of any State Government/All India Council of Technical Education with three year Supervisory or practical or teaching experience in the concerned trade from a reputed Industry/recognized institution;
Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Hair & Skin Care (Re- Advertised). Full time, regular mode Bachelor Degree in Beauty Culture/Beauty Culture and Hair Dressing from any recognized institute/university recognized by National Institute of Fashion Technology/ All India Council of Technical Education/State Board of Technical Education of any State Government with two years supervisory or practical or teaching experience in the concerned trade from a reputed Industry/recognized institution; OR Full time, regular mode Diploma in Beauty Culture/ Beauty Culture and Hair Dressing from any institute/university recognized by National Institute of Fashion Technology/ All India Council of Technical Education/State Board of Technical Education of any State Government with three years supervisory or practical or teaching experience in the concerned trade from a reputed Industry/recognized institution;
Lab Attendant (Food Production, Food & Beverage Service) Instructor (Theory) (Re- Advertised). (i) One year and six month duration certificate Course or Diploma in concerned trade from Food Craft Institute/Institute of Hotel Management approved by National Council of Hotel Management & Catering Technology / All India Council of Technical Education / State Board of Technical Education of any State Government; (ii) Five years Practical experience from a recognized institution/minimum three star Hotel, Including training period;
Painter General Instructor(Theory) (Re- Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Paint Technology/ Master’s Degree in Painting from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Paint Technology / Surface Technology from State Board of Technical Education of any State Government with two years practical/ teaching experience
Mechanic Motor Vehicle Instructor(Theory) (ReAdvertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical / Automobile from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Automobile from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Information Technology and Electronics System Maintenance Instructor(Theory) (Re- Advertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Electronics/ Electronics & Communications/ TeleCommunication Engineering from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Electronics/ Electronics & Communications/ Tele-Communication Engineering from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Mechanic Machine Tool maintenance Instructor(Theory) (Re- Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical / Production /Industrial from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical / Production /Industrial from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Mechanic Motor Vehicle Instructor(Practical) (ReAdvertised). National Trade Certificate/ National Apprenticeship Certificate in Mechanic Motor Vehicle with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Motor Vehicle passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Information Technology and Electronics System Maintenance Instructor (Practical) (Re- Advertised i) National Trade Certificate/ National Apprenticeship Certificate in Information Technology and Electronics System Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Information Technology and Electronics System Maintenance / Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period
Mechanic Machine Tool Maintenance Instructor (Practical) (Re- Advertised). National Trade Certificate/ National Apprenticeship Certificate in Mechanic Machine Tool Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Machine Tool Maintenance passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Sheet Metal Worker Instructor (Theory) (Re- Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/ Metallurgical/ Production/ Industrial/ Fabrication from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Metallurgical/ Production/ Industrial/ Fabrication from State Board of Technical Education of any State Government with two years practical/ teaching experience
Instrument Mechanic Instructor (Theory) (Re- Advertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Instrumentation /Instrumentation & Control/Electronics & Instrumentation from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Instrumentation/Instrumentation & Control/Electronics & Instrumentation from State Board of Technical Education of any State Government with two years practical/ teaching experience
Craft Instructor (women)(Dress Making (Theory) (ReAdvertised). Full time, regular mode Bachelor Degree in Apparel/ Dress Design/ Garment Manufacturing from any institute / University recognized by National Institute of Fashion Technology (NIFT)/ All India Council of Technical Education/ State Board of Technical Education of any State Government with one year practical/teaching experience; OR Full time regular mode Diploma in Apparel/ Dress Design/ Garment Manufacturing from State Board of Technical Education of any State Government or National Institute of Fashion Technology with two year practical/ teaching experience;
Mechanic Diesel Instructor(Theory) (Re- Advertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Automobile from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience.
OR
Diploma in Engineering or its equivalent in Mechanical/Automobile from State Board of Technical Education of any State Governmentwith two years practical/ teaching experience.
Instrument Mechanic Instructor (Practical) (ReAdvertised). i) National Trade Certificate/ National Apprenticeship Certificate in Instrument Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Instrument Mechanic passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period
Craft Instructor (women)(Dress Making) (Practical) (Re- Advertised) i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teaching Training Course (TTC) in Dress Making/ Two years Fashion Technology with five year practical/ teaching experience including training period;
Mechanic Diesel Instructor (Practical) (Re- Advertised) i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Diesel with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Diesel/ Mechanic Motor Vehicle passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period
Mechanic Agriculture Machinery Instructor (Theory) (ReAdvertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Agriculture from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/Agriculture Engineering / Agriculture Technology from State Board of Technical Education of any State Government with two years practical/ teaching experience
Mechanic Consumer Electronics Instructor (Practical) (Re- Advertised). National Trade Certificate/ National Apprenticeship Certificate in Mechanic Consumer Electronics with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Consumer Electronics/Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Mechanic Agriculture Machinery Instructor (Practical) (ReAdvertised) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Agriculture Machinery with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Tractor Mechanic / Farm Mechanic and Agriculture Mechanic Machinery passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.
Craft Instructor (women) Hair & Skin Care(Theory) (ReAdvertised) i) Full time, regular mode Bachelor Degree in Beauty Culture/ Beauty Culture & Hair Dressing from any institute/University recognized by National Institute of Fashion Technology (NIFT)/ All India Council of Technical Education/ State Board of Technical Education of any State Government with one year practical/teaching experience; OR Full time, regular mode Diploma in Beauty Culture / Beauty Culture & Hair Dressing from State Board of Technical Education of any State Government or National Institute of Fashion Technology with two year practical/ teaching experience;
Interior Decoration and Designing Instructor (Theory) (ReAdvertised). AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture / Civil / Interior Decoration & Designing from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience.
OR Diploma in Engineering or its equivalent in Architecture / Civil / Interior Decoration & Designing from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Interior Decoration and Designing Instructor (Practical) (Re- Advertised) i) National Trade Certificate/ National Apprenticeship Certificate in Interior Decoration and Designing with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Interior Decoration and Designing passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period
Craft Instructor (women) Computer Aided Embroidery (Theory) (Re- Advertised) Full time, regular mode Bachelor Degree in Apparel/Dress Design/ Garment Manufacturing/ Fashion technology from any recognized institute/ University recognized by National Institute of Fashion Technology(NIFT)/ All India Council of Technical Education with one year practical/ teaching experience. OR Full time, regular mode Diploma in Apparel/Dress Design/ Garment Manufacturing/Fashion Technology from Board of Technical Education of any State Government or National Institute of Fashion Technology with two year Practical/ teaching experience
Craft Instructor (women) Computer Aided Embroidery (Practical) (Re- Advertised) i) National Trade Certificate /National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training course (TTC) in Computer Aided Embroidery/ Embroidery with five year Practical/teaching experience including training period: ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Draughtsman Civil Instructor (Theory) (Re- Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture/Civil from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture/ Civil from State Board of Technical Education of any State Government with two years practical/ teaching experience
Carpenter Instructor (Theory) (Re- Advertised) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture/Civil from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture/Civil from State Board of Technical Education of any State Government with two years practical/ teaching experience.
Technical Assistant(Re- Advertised). AICTE recognized Bachelor Degree in Mechanical /Electrical /Civil / Electronics /Information Technology /Architecture/Computer from AICTE recognized institutions /university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical / teaching experience; Or Diploma in Mechanical/ Electrical /Civil/Electronics/Information Technology/Architecture/Computer from Haryana State Board of Technical Education, with two years practical / teaching experience;

HSSC Librarian, Welder, Instructor, Storekeeper Age limit and Relaxation

To apply HSSC Job, the candidates required to attain the following age limit. The notified aged candidates are only allowed to apply for this job. Check the HSSC Librarian, Welder, Instructor, Storekeeper job 2019 age limit and relaxation details from below.

Age limit
  • 17 – 42 years
Age Relaxations

Category of Candidates Relaxation ( in Upper age limit )
SC/ST 5 Years
OBC 3 Years
Persons with Disabilities 10 Years
SC/ST PWD 15 Years
OBC PWD 13 Years

Haryana Staff Selection Commission (HSSC) Application Fees, Salary Details & Selection Process

The candidates are check the HSSC Librarian, Welder, Instructor, Storekeeper job application fees, salary (pay scale) & selection process details from below.

Application Fees

The applicants are requested to pay the application fees for the Librarian, Welder, Instructor, Storekeeper job in HSSC as per the notified mode.

Category of post General SC/BC/EWS Candidates of Haryana State
Cat. No. 1 to 71 & 73 to 97 ₹150 ₹75 ₹35 ₹18
Cat. No. 72 ₹100 ₹50 ₹25 ₹13
PwD (Person with Disability)/ExServiceman of Haryana No. Fee

Other Job ⇉  HSSC Auction Recorder Result 2019

Salary details

Haryana Staff Selection Commission (HSSC) 3206 Librarian, Welder, Instructor, Storekeeper various salary range details are given below.

Name of the Post Pay Scale
Skill Development & Industrial Training Department, Haryana, Panchkula
Surveyor Instructor (Theory) FPL-6(₹35400-112400)
Forger & Heat Treater (Black Smith)Instructor (Theory) FPL-6(₹35400-112400)
Librarian (Re-Advertised) Pay Matrix Level-6 (₹35400-112400)(Pre revised ₹9300-34800+3600 G.P.)
Turner Instructor, Theory(Re-Advertised) Pay Matrix Level-6/₹35400(Pre revised 9300-34800+3600G.P
Welder (Gas & Electric) Instructor, Practical (ReAdvertised). FPL-6(₹35400-112400) Pre-Revised 9300- 34800+3600 GP
Fitter Instructor, Theory (Re-Advertised) FPL-6 (₹35400-112400) Pre-Revised 9300- 34800+3600 GP.
Employability Skill Instructor, (Re-Advertised). FPL-6 (₹35400-112400).
Surveyor Instructor, Practical (Re-Advertised). FPL-6 (₹35400-112400)
Computer Instructor (Re-Advertised FPL-6 (₹35400-112400)
Mechanical Refrigerator and Air Condition Instructor, Theory (Re-Advertised) FPL-6 (₹35400-112400)
Workshop Calculation & Science Instructor (ReAdvertised) FPL-6 (₹35400-112400)
Engineering Drawing Instructor (Re-Advertised). FPL-6 (₹35400-112400)
Plumber Instructor, Theory (Re-Advertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Foundry Man (Moulder) Instructor (Theory) (Re-Advertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Architectural Assistant Instructor, Theory (Re-Advertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Carpenter Instructor, Practical (Re-Advertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Wireman Instructor, Theory (Re-Advertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Storekeeper (Re-Advertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Mill wright Mechanic (Electrical/Electronic) Instructor, Theory (Re-Advertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Machinist Instructor, Practical (Re-Advertised FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Mill wright Mechanic (Mechanical) Instructor, Theory (ReAdvertised).  FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Group Instructor/ Apprenticeship Supervisor/Senior Technical Assistant/ Junior apprenticeship and Placement Officer (Re-Advertised). FPL-6 (35400-112400) Pre-revised 9300-34800+4000 GP.
Electrician Instructor Theory(Re-Advertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Apprenticeship Instructor Re-Advertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Turner Instructor Practical(Re-Advertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Welder (Gas & Electric) Instructor Theory (ReAdvertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Architectural Assistant Instructor Practical (ReAdvertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Mechanic Electronic Instructor Theory(Re-Advertised). – FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Fitter Instructor Practical(Re-Advertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Computer Operator Programming Assistant Instructor (Theory) (Re-Advertised). – FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Plastic Processing Operator Instructor (Practical) (ReAdvertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Mechanic Electronic Instructor (Practical) (ReAdvertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Desk Top Publisher Operator Instructor (Practical) (ReAdvertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Plastic Processing Operator Instructor Theory) (ReAdvertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Electrician Instructor (Practical) (Re-Advertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Tractor Mechanic Instructor (Theory) (Re-Advertised)  FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Craft Instructor (women) Fashion Technology (Theory) (ReAdvertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Tractor Mechanic Instructor (Practical) (Re-Advertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Wireman Instructor (Practical) (Re-Advertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Mechanic Computer Hardware Instructor (Theory) (ReAdvertised).  FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Mechanic Computer Hardware Instructor (Practical) (ReAdvertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Mech. Refrigerator and Air Conditioning Instructor (Practical) (Re-Advertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Desktop Publisher Operator (Theory) (Re-Advertised) FPL-6 (35400-112400).
Draughtsman Civil Instructor (Practical) (Re-Advertised) FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Draughtsman Mechanical Instructor(Theory) (ReAdvertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP.
Craft Instructor (women) cutting & Sewing (Theory) (ReAdvertised) FPL-6 (35400-112400).
Draughtsman Mechanical Instructor (Practical) (ReAdvertised). FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP
Craft Stenography Hindi Instructor (Theory) (ReAdvertised). FPL-6 (35400-112400)
Craft Stenography Hindi Instructor (Practical) (ReAdvertised). – FPL-6 (35400-112400).
Machinist Instructor (Theory) (Re-Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP.
Craft Stenography English Instructor (Theory) (ReAdvertised). FPL-6 (35400-112400).
Craft Stenography English Instructor (Practical) (ReAdvertised) FPL-6 (35400-112400).
Machinist (Grinder) Instructor (Practical) (Re-Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP.
Craft Instructor Health Sanitary Inspector (Theory) (ReAdvertised). FPL-6 (35400-112400).
Craft Instructor Health Sanitary Inspector (Practical) (ReAdvertised) FPL-6 (35400-112400).
Machinist Grinder Instructor (Theory) (Re-Advertised). -FPL-6 (35400-112400
Litho Offset Machine Minder Instructor (Theory) (ReAdvertised)= FPL-6 (35400-112400).
Tool & Die Maker (Dies & Moulds) Instructor (Theory) (Re-Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Hospitality Course Senior Instructor (Hospitality) (Theory) (Re-Advertised). FPL-6 (35400-112400)
Tool & Die Maker (Dies & Moulds) Instructor (Practical) (Re-Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Food production Instructor (Theory) (Re-Advertised). FPL-6 (35400-112400).
Computer Networking and Hardware Technician (ReAdvertised). FPL-6 (35400-112400)
Craft Instructor (women) Hair & Skin Care (Practical) (Re-Advertised). FPL-6 (35400-112400)Pre-Revised 9300-34800+3600 GP.
Computer Operator (Re-Advertised). FPL-6 (35400-112400).
Junior Programmer (Re-Advertised). FPL-6 (35400-112400).
Craft Instructor (women)Fashion Technology (Practical) (Re-Advertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP..
Plumber Instructor (Practical) (Re-Advertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Mill Wright Mechanic (Electrical/ Electronics) Instructor (Practical) (Re- Advertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Mill Wright Mechanic (Mechanical) Instructor (Practical) (Re- Advertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Fashion Technology, Cutting and Sewing, Embroidery and Needle Work, Dress making (Re- Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+4000 GP.
Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Hair & Skin Care (Re- Advertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+4000 GP.
Lab Attendant (Food Production, Food & Beverage Service) Instructor (Theory) (Re- Advertised). FPL-2 (19900-63200).
Painter General Instructor(Theory) (Re- Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 G
Mechanic Motor Vehicle Instructor(Theory) (ReAdvertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Information Technology and Electronics System Maintenance Instructor(Theory) (Re- Advertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP.
Mechanic Machine Tool maintenance Instructor(Theory) (Re- Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Mechanic Motor Vehicle Instructor(Practical) (ReAdvertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Information Technology and Electronics System Maintenance Instructor (Practical) (Re- Advertised FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP.
Mechanic Machine Tool Maintenance Instructor (Practical) (Re- Advertised). -FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Sheet Metal Worker Instructor (Theory) (Re- Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP.
Instrument Mechanic Instructor (Theory) (Re- Advertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Craft Instructor (women)(Dress Making (Theory) (ReAdvertised). FPL-6 (35400-112400).
Mechanic Diesel Instructor(Theory) (Re- Advertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP
Instrument Mechanic Instructor (Practical) (ReAdvertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP.
Craft Instructor (women)(Dress Making) (Practical) (Re- Advertised) FPL-6 (35400-112400).
Mechanic Diesel Instructor (Practical) (Re- Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP.
Mechanic Agriculture Machinery Instructor (Theory) (ReAdvertised). -FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP.
Mechanic Consumer Electronics Instructor (Practical) (Re- Advertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP
Mechanic Agriculture Machinery Instructor (Practical) (ReAdvertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP
Craft Instructor (women) Hair & Skin Care(Theory) (ReAdvertised) FPL-6 (35400-112400)
Interior Decoration and Designing Instructor (Theory) (ReAdvertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP.
Interior Decoration and Designing Instructor (Practical) (Re- Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP.
Craft Instructor (women) Computer Aided Embroidery (Theory) (Re- Advertised) FPL-6 (35400-112400)
Craft Instructor (women) Computer Aided Embroidery (Practical) (Re- Advertised) FPL-6 (35400-112400).
Draughtsman Civil Instructor (Theory) (Re- Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP.
Carpenter Instructor (Theory) (Re- Advertised) FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP.
Technical Assistant(Re- Advertised). FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP

Selection Process

Haryana Staff Selection Commission (HSSC) may follow the following process to select the candidates. For more accurate information check the official notification.

  • Written Examination
  • Personal Interview
  • Document Verification

How to apply for HSSC Jobs 2019

Candidates willing to be a part of HSSC have to apply for HSSC Recruitment 2019 for Librarian, Welder, Instructor, Storekeeper posts through Online mode from 05.08.2019 to 20.08.2019. The links for respective posts will be available on the Official website of Haryana Staff Selection Commission (HSSC). To complete the application process for HSSC Recruitment 2019, follow the steps mentioned below:

  • Go to official website adv122019.hryssc.in.
  • Find the “Recruitment” link on this website and click it.
  • Search for the advertisement HSSC Librarian, Welder, Instructor, Storekeeper and select it.
  • Alternatively, Download the official HSSC Recruitment 2019 notification. (Official Notification)
  • Read the official notifications carefully.
  • Check and verify your eligibility criteria may or may not meets the required criteria.
  • Next, Visit the HSSC Recruitment 2019 Official Online apply link. (Apply Link)
  • Click the apply button and fill the details required by HSSC for Librarian, Welder, Instructor, Storekeeper job.
  • Upload all the necessary documents required in the notified format and size.
  • Verify the given details are correct and accurate.
  • Submit the application.
  • Make the payment as per the notified mode, if Haryana Staff Selection Commission (HSSC) asks. else, move for next step.
  • Finally, Print your application form for future reference.

Other Job ⇉  RAC Recruitment 2019 - Apply Online for 290 Executive Engineer (in GAETEC), Scientist B (in DRDO, DST, ADA) Posts

Haryana Staff Selection Commission (HSSC) Important dates for Librarian, Welder, Instructor, Storekeeper Job

The following important dates are needs to be remembered by the candidates for Haryana Staff Selection Commission (HSSC) recruitment 2019.

HSSC Recruitment 2019 Important Dates
Apply From 05.08.2019
Last date to Apply 20.08.2019

Haryana Staff Selection Commission (HSSC) Official Notification and Official Online Apply Link

HSSC Recruitment 2019 Official Notification Download Official Notification
HSSC Recruitment 2019 Online Apply Link Click Here to Apply
Join & Get Upcoming Job Updates Alerts Regularly Join Now

Other Government Jobs 2019: (Recently Updated)

Last DateRecruiterQualifications
16.09.2019HPCL Jobs – Apply Online for 164 Quality Control Officer, Project Engineer, Law Officer & Other PostsDiploma, MBA, MSC, B.E/B.Tech
30.08.2019NICPR Jobs – Apply for 06 Consultant, Laboratory Technician, Project Assistant Posts12th, DMLT, B,Sc, Master Degree
26.09.2019Indian Army Amritsar Rally Jobs - Apply Online for Various Soldier General Duty, Soldier Technical, Soldier Clerk Posts10th, 12th, in D.Pharma
04.09.2019Delhi Metro Rail Corporation Ltd Jobs - Apply for 10 Assistant Manager, Supervisor, Maintainer PostsITI, Diploma, B.E/B.Tech
17.09.2019AIIMS Nagpur Jobs - Apply for 50 Professor, Associate Professor, Assistant Professor PostsMD/MS
22.09.2019Indian Army Trichy Rally Jobs - Apply Online for Various Soldier Pharma PostsD.Pharma, B.Pharma
View All Govt Jobs »» View All Govt Jobs »»


Jobskar wishes you all the best. Visit 'www.Jobskar.com' for all your government job, teaching job, results, admit cards updates alerts, and current affairs for various govt jobs.


Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close
Close

Adblock Detected

Please consider supporting us by disabling your ad blocker